Professional high-output 1000W DMX fog machine with advanced technology and a special heating element design that uses an oil-type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output and automatic circuit cut=off to protect pump if fog fluid tank runs dry. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts. The fog machine also has convenient features such as a LED heating indicator system that changes colours depending on whether the machine is heating up, ready to use, or if the fog fluid is low. It also has built-in DMX control with a 3-button digital LCD display on the rear panel with 3 operational modes: Manual, DMX with 3 channels or built-in Timer Remote. It also provides 3-pin DMX XLR in/out connections, a 1500W heater, convenient carrying handle and a single yoke to mount on a wall on from trussing bracket. This fog machine produces 595 cubic meters of fog per minute, has an external tank with a 5l capacity and an 8 minute warm-up time. It can be used with the ADJ’s DMX-Timer remote or FF23WR wireless remote control (both sold separately). It uses only high-quality, water-based fog fluid. A 1-button remote control is included. Power consumption: 1600W max. Power: AC 120V/60Hz or 230V/50Hz (non-switching). Dimensions: 476 x 301 x 353 mm. Weight: 11.9 kg.