Audio-Technica AT2031 Конденсаторний інструментальний мікрофон

Audio-Technica AT2031 — A Studio Pencil Condenser for Strings, Piano, and Percussion

The Audio-Technica AT2031 is a small-diaphragm, end-address cardioid condenser microphone engineered for critical studio and live recording of acoustic instruments. Built around a fixed-charge, permanently polarized back-plate element, it offers an extended 20 Hz to 20 kHz frequency response with a deliberately gentle rise in the upper register. That high-frequency lift is the mic's defining tonal signature — adding presence, air, and transient detail exactly where strings, harp, and piano need it most. The AT2031 is the right choice for engineers and players who want a dedicated instrument mic that flatters acoustic sources without sounding harsh.

Designed Around Its 12 kHz Presence Peak and a Back-Electret Element

Where most pencil condensers aim for ruler-flat response, the AT2031 leans into a sizeable presence peak centered around 12 kHz — high enough in the spectrum to add shimmer rather than bite. Combined with a smooth, extended low end, this shape gives the mic its "larger-than-life sparkle" prized by reviewers. The permanently polarized back-electret element stays stable over time and contributes to the mic's reputation for consistency across long sessions. A star-shaped metal grille protects the capsule while preserving precise cardioid directivity.

Polar Pattern and Dynamic Range — Capturing Quiet and Loud Sources

The cardioid pickup pattern narrows the rear lobe of sensitivity, improving isolation when the mic is placed near other instruments on stage or in a multi-mic studio session. This is exactly what the AT2031 was introduced to solve: give engineers a clean instrument channel that doesn't bleed in the rest of the kit.

• Polar Pattern: Cardioid — focused on-axis pickup that rejects off-axis spill from adjacent instruments
• Maximum Input SPL: 141 dB SPL at 1 kHz, 1% T.H.D. — handles rim shots, brass transients, and close-miked guitar amps without distortion
• Dynamic Range: 124 dB, 1 kHz at max SPL — wide headroom from the quietest pizzicato to the loudest snare hit
• The 17 dB SPL self-noise sits low enough to pair cleanly with today's high-gain digital preamps without raising the noise floor in the mix.

Sensitivity, Impedance, and Power Requirements — Plug-and-Play With Any Interface

The AT2031 is a true phantom-powered condenser, so any mixer, audio interface, or preamp with 48V supplies can drive it without external hardware. Combined with balanced XLR wiring, the output impedance keeps long studio runs cable-friendly.

• Open-Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa — produces a healthy output level that requires only modest preamp gain
• Output Impedance: 85 ohms — balanced Lo-Z signal that drives long XLR runs cleanly
• Phantom Power: 48 V DC, 2.0 mA typical — standard 48V supply from any pro interface or console
• The integral 3-pin XLRM-type connector with Pin 2 hot ensures balanced wiring for noise-free cable runs.

Physical Build, Filter, and Accessories — At Home on Stage or in the Studio

At 134 g and 143 mm long with a 21 mm maximum body diameter, the AT2031 stays discreet on a small instrument clamp — easy to tuck above a piano soundboard, inside a harp, or below a snare. The recessed high-pass switch keeps the filter setting protected from accidental changes mid-session.

• Low-Frequency Roll-Off: 150 Hz, 6 dB/octave — gentle slope that softens stage rumble without thinning the instrument
• Weight: 134 g — light enough for unobtrusive clip-on placement
• Slim pencil format — 143 mm in length with a 21 mm maximum body diameter — tucks discreetly out of the player's sight lines on stage and in the studio.
• Included Accessories: AT8405a stand clamp, foam windscreen, soft protective pouch — everything needed to start recording out of the box

Who the AT2031 Is For — Players and Engineers Tracking Acoustic Instruments

The AT2031 is the right choice for recording engineers, classical and acoustic musicians, and small-studio producers who need a workhorse pencil condenser for stringed instruments, piano, harp, and percussion. Its subtle high-frequency lift adds the kind of articulation that helps acoustic guitar, violin, and cello cut through a dense mix without resorting to aggressive EQ. The same presence peak that flatters strings makes the AT2031 an effective drum overhead, hi-hat, or hand-percussion mic, while its 141 dB SPL ceiling handles louder sources like brass or close-miked amps. Two units work well together in an X/Y or ORTF stereo configuration, making the AT2031 a practical entry into affordable stereo recording setups.

Audio-Technica 20 Series — A Workhorse Line Rooted in Studio Reliability

Introduced in 2011 as part of Audio-Technica's 20 Series, the AT2031 continues the company's long-running focus on back-electret condenser designs that bring serious studio performance to project-studio price points. The satin-black steel housing tolerates the wear of a touring gig bag, while the recessed high-pass switch sits flush with the body to prevent accidental toggling mid-session.