Behringer RX1202FX V2 Стійка міксер

Behringer RX1202FX V2 — Premium 12-Input Rack Mixer with Built-In Effects

The Behringer RX1202FX V2 is a rack-mountable 12-input mic/line mixer designed for installations, houses of worship, sub-mixing duties, and small-to-mid live rigs where space in a 19-inch rack matters more than a tabletop footprint. Built around eight studio-grade XENYX mic preamps, two stereo line inputs, and a 24-bit on-board effects engine, this Eurorack Pro unit delivers a full front-of-house or recording mix without requiring a stack of outboard processors. The unit ships with a manual and a power adapter, ready to drop into any standard 3U rack slot.

What Sets the RX1202FX V2 Apart

What makes this rack mixer stand out in its category is the combination of eight XENYX preamps — rated for a 130 dB dynamic range and a bandwidth extending from below 10 Hz to above 200 kHz — with channel EQ circuitry modelled on classic British consoles of the 1960s and 1970s. Add a 24-bit Multi-FX processor carrying 100 presets (reverb, chorus, flanger, delay, pitch shifter, and multi-effects), and the Behringer RX1202FX V2 covers both clean vocal capture and creative sound shaping in a single 3U chassis.

Mic Preamps and Channel EQ — Capture and Shape Your Sound

The preamp section is the heart of any mixer, and the XENYX design here is engineered to hold its own against far more expensive stand-alone units. Each of the eight mono channels feeds a high-headroom preamp with switchable phantom power, so condenser microphones can be deployed for vocals, drum overheads, or acoustic instruments without an external power supply.

\n
• Mic Preamps: 8 × XENYX — 130 dB dynamic range with bandwidth from below 10 Hz to above 200 kHz for transparent, detailed capture
\n
• Microphone Channel EQ: 3-band British-style — warm, musical tone-shaping modelled on legendary 1960s/70s console circuitry
\n
• With switchable +48 V phantom power, condenser microphones can be used across all eight XLR inputs, providing versatility for various recording environments.

Effects, Routing, and I/O — A Complete Mix Hub in 3U

On-board effects remove the need to patch in a separate reverb or delay unit, while dedicated sends on every channel let the engineer decide how much polish each source receives. The dual 4-segment LED ladder on the master section gives a clear visual reference for output level, and the front-panel headphone jack with its own level dial supports isolated monitoring during recording or soundcheck.

\n
• Internal Effects: 24-bit Multi-FX, 100 presets — reverb, chorus, flanger, delay, pitch shifter, and multi-effects at the turn of a single knob
\n
• Inputs: XLR, 6.3 mm jack line, RCA tape in, AUX return — 8 mono mic/line plus 2 stereo line channels for keyboards, playback, and sub-mixed drums
\n
• Outputs: XLR main L/R, 6.3 mm control room, headphone, RCA tape out — balanced feeds for PA, monitors, and recording simultaneously

Rackmount Form Factor and Build — Built for Permanent Installation

The 3U chassis slides into any standard 19-inch rack, making the model a natural fit for touring racks, installed AV systems, and project studios where desk space is at a premium. Smooth 60 mm faders on every channel and the master section give precise, repeatable level control, while the universal power supply simplifies global use.

\n
• Rackmount: Yes — 19-inch, 3U — 133 × 482 × 150 mm chassis that integrates with standard studio and live racks
\n
• Faders: 60 mm per channel and master — smooth, precise level control for live mixing and studio recall
\n
• Bluetooth: No — wired-only design keeps the signal path predictable in fixed installations

Target Audience for the Mixer

This rackmount unit is the right choice for small venues, churches, schools, multimedia centres, and project studios that need to mix a changing variety of microphone and line sources in a permanent rack installation. Keyboard players and electronic drummers running multiple rackmount modules will appreciate the eight mono channels plus two stereo returns for sub-mixing a full rig down to a single stereo feed. Touring engineers can rely on the balanced XLR main outputs, dedicated monitor send, and 48 V phantom power to handle vocal-heavy small-band gigs without bringing extra outboard gear. Home recordists tracking multiple rooms simultaneously benefit from the on-board 24-bit effects and the front-panel headphone monitoring section for click-track and cue isolation.

About Behringer and the Eurorack Pro Line

Founded in Germany by Uli Behringer, the company has built its reputation on delivering feature-rich audio equipment at price points accessible to home studios, rehearsal rooms, and mobile PA operators. The Eurorack Pro line extends that philosophy into the 19-inch rack format, and the series continues the tradition of pairing high-headroom XENYX preamps with British-style EQ and integrated effects.