CIOKS SOL Блок живлення

CIOKS SOL — Compact Isolated Power Supply for Small to Medium Pedalboards

The CIOKS SOL is a mains-powered, switch-mode pedalboard power supply built for small to medium-sized boards with power-hungry digital effects. Designed in Denmark and assembled in Poland, it delivers 660mA at 9V DC per outlet and four switchable voltages in the brand's smallest mains-powered form factor. This unit is the right choice for guitarists who want clean, isolated power without wall-warts cluttering their rig.

What Sets This Supply Apart in the Compact Power Category

Despite a 25.4 mm-tall chassis, this model delivers 30W across five isolated outputs — the highest power density in the manufacturer's compact range. Each outlet switches independently between 9V, 12V, 15V, and 18V via DIP switches, and the included Flex cable system uses RCA connectors on the supply side for a low-profile fit. Multistage filtering keeps the noise floor below what most analog or digital pedals will reveal.

Per-Outlet Power and Voltage Switching

Every outlet delivers 6W of isolated power with the voltage set independently. At 9V the unit provides 660mA, at 12V 500mA, at 15V 400mA, and at 18V 330mA — enough headroom for the Line 6 HX FX, Walrus Audio R1, and other DSP-heavy pedals that exceed the 500mA ceiling of typical compact supplies.

• Per-Outlet Current at 9V: 660 mA — comfortably exceeds the 500mA limit of most compact competitors
• Selectable Voltages per Outlet: 9V / 12V / 15V / 18V DC — DIP-switch configurable on each of the five outputs
• The total output power of 30 W is distributed across the five isolated outlets.

Isolated Outputs and Multi-Stage Filtering

Each DC output has its own isolated transformer winding, preventing ground loops and digital noise from passing between pedals. This matters most when mixing analog drives with digital reverbs, modulators, and amp sims on the same board.

• Isolated DC Outputs: 5 — fully isolated to prevent ground-loop hum
• Noise Filtering: Multi-stage — ultra-low noise floor for high-gain and digital pedals
• Power Topology: Switch-mode mains-powered — no external wall-wart required

Dimensions, Mounting Hardware, and Included Flex Cables

At 25.4 mm tall and 410 g, the supply slides under most compact pedalboards, including the Pedaltrain Nano and Templeaudio boards for which mounting hardware is included. Compatible with the CIOKS GRIP v2.0 bracket for drill-free mounting under Pedaltrain boards.

• Dimensions: 130 × 88 × 25.4 mm — fits under Pedaltrain Nano and similar compact boards
• Weight: 410 g — light enough for travel rigs
• Mains Input: 100–240 V AC universal — single IEC cable, no wall-wart
• Included Flex Cables: 9 (Type 1, 2, 4, Split, 3-way daisy chain) — covers center-negative, center-positive, and 5.5/2.5 mm pedals out of the box