Eurolite 2700 DMX Стробоскоп

Eurolite Superstrobe 2700 DMX — Classic 1500 W Strobe with DMX512 Control

The Eurolite Superstrobe 2700 DMX is a high-output strobe light built around a pre-installed 1500 W flash tube and an elaborate reflector system that throws intense, even pulses across a venue. Designed for clubs, dance schools, stages, and rental fleets, this strobe delivers the punchy freeze-frame effect that has defined dance-floor lighting for decades. DMX512 control with a 2-channel interface lets operators dial in brightness and flash rate steplessly.

What Sets This Strobe Apart

Inside the housing sits an OMNILUX XOP-15 100 V / 1500 W xenon flash tube, a proven lamp that delivers bright, white strobe pulses. The reflector design maximises throw and uniformity. Passive convection cooling eliminates fan noise, earning a Class 1 noise rating suitable for sound-critical environments.

Power & Lamp

Electronic power management protects the flash tube from current spikes. Operating from 230 V AC mains, the unit draws its full 1500 W only during the flash pulse.

• Total connected load: 1500 W
• Power supply requirements are 230 V AC, 50 Hz, which is the standard European mains configuration.
• Lamp type: Xenon flash tube (OMNILUX XOP-15, 100 V / 1500 W) — pre-installed and replaceable via standard spare parts

DMX Control & Flash Performance

DMX512 integration maps brightness and flash rate to dedicated DMX values, so any standard lighting desk can drive the strobe without custom profiles. Stand-alone mode is available for quick plug-and-fire setups.

• DMX channels: 2 (brightness + flash rate) — simple mapping on any console
• Brightness range: 0–100%, stepless
• Flash rate: 1–12 flashes per second, stepless
• DMX connectors: 3-pin XLR (M) input / 3-pin XLR (W) output — daisy-chain multiple units

Housing & Mounting

A matte-black metal chassis keeps the unit discreet on stage while protecting the internals from touring wear. At 3.11 kg and a compact 46 × 24 × 14 cm footprint, the strobe is light enough for truss mounting yet heavy-duty enough for permanent installs.

• Dimensions: 460 × 240 × 140 mm
• Weight: 3.11 kg — one-person rigging
• Cooling: Passive convection — silent operation, no fan failure points
• Mounting holes: 3 × Ø12 mm — secure rigging on stands or truss