Overlock sewing machine. 2, 3, 4-thread overlock offering 7 types of stitches and 9 sewing programs. It is the highest quality overlock with an all-metal interior and very easy operation. The Janome 744 D overlock is equipped with a free arm, differential feed, upper knife deactivation, scrap compartment, and other useful features. The Janome 744 D overlock trims and neats the edge of the fabric in one operation. The four-thread overlock with differential feed is ideal for finishing, sewing and hemming edges, decorative seams on the front of the fabric, a free arm for sewing sleeves, pants, and other closed circles, with the option of using it as a three-thread overlock or a two-thread overlock for hemming or other adjustments that give sewn garments a professional look. Threading the machine is very easy, and a simplified diagram is located under the machine cover. Differential feeding with a split feed dog allows for perfect sewing without puckering or excessive pulling of any fabric. Easy conversion to a rolling (hem) stitch without having to change the stitch plate. Just press once to adjust.

Stitch overview:

• Four-thread overlock stitch

The stitch has 2 threads (from the needle) and the upper and lower looper threads form a four-thread stitch. The stitch is strong but does not lose its elasticity.

• Elastic four-thread stitch

The stitch is similar to the four-thread stitch, but thanks to the knit fabric program, it is better suited to elastic materials.

• Four-thread gathering

This is the same stitch as the four-thread stitch, but you use the differential setting. The stitch is suitable for thin and medium-weight materials.

• Elastic overlock stitch
• This stitch uses 2 needles and the lower looper. This gives you maximum elasticity. The thread of the second needle ensures perfect stitch strength.
• Three-thread wide stitch

Three-thread straight stitch, suitable for medium-weight and heavy fabrics.

• Narrow triple stitch

It has the same properties as the triple stitch, but is more suitable for women's underwear.

• Narrow overlock stitch

Three threads form a straight stitch that is suitable for finishing the material.

• Rolling stitch

Three threads form an uneven stitch. This causes the material to curl inward.

• Two-thread rolled hem

The threads from the lower and upper looper needles create a stitch that curls inward and beautifully finishes the fabric.

• Two-thread overlock

The threads from the lower looper needle create a thin, flat finish on the fabric. Suitable for thin fabrics.

Features of the Janome 744 D overlock

• Robust metal construction for stable operation even under heavy loads
• Powerful 105 W motor
• Maximum speed of 1300 stitches/min
• Electronic trigger
• High-quality built-in 1-point LED lighting
• 7 overlock and serging stitches
• 9 different program combinations
• Differential feed prevents fabric puckering
• Number of threads: 4, 3, or 2
• Number of needles: 2 or 1
• Option of normal or rolled hemming
• Upper knife shut-off mechanism for sewing without trimming
• Hardened trimming knives for longer service life
• Auxiliary panel shows the correct threading of the machine
• Color-coded thread tensioners
• Smooth thread tension control
• Smooth stitch length control from 1 to 5 mm
• Adjustable trim width from 3.1 to 7.5 mm
• Smooth differential feed control from 0.5 to 2.2 mm
• Continuous adjustment of the width of the cut fabric
• Pressure adjustment on the presser foot - useful when sewing different materials in different layers
• Thread trimmer located on the light cover and presser foot bar
• Practical fabric scrap box - keeps your workspace clean
• Smooth speed control, option to sew very slowly or increase the speed smoothly to the maximum
• Needles: HAx1

Janome 744 D overlock accessories:

• Needle set
• Large and small screwdriver
• Tweezers
• Spare knife
• Wrench
• Thread nets
• Bobbin holder
• Brush
• Needle threader
• Oil
• Mounting plate-holder
• Scrap box
• Foot control and other standard accessories