Light4Me LED Derby Par Світлова збірка

Light4Me LED Derby Par — Mobile DJ Lighting Set

The Light4Me LED Derby Par light set packages four LED fixtures onto a single 75 cm bar, giving mobile DJs and event crews a complete wash-and-beam rig that fits into a soft carry bag. Two RGB PAR cans and two RGBW Derby effects run from one IEC inlet, so setup takes minutes. This set is the right choice for performers who need a self-contained rig that travels in one piece. Built-in automatic programs and a sound-active microphone let the show run without a console, while 3-pin DMX I/O opens the door to full programming.

What sets this rig apart

The combination of RGB PAR spots and RGBW Derby effects on one bar is unusual at this tier — most entry-level sets ship with one fixture type only. This combined-effect design lets a single rig deliver both color washes and animated beam patterns without buying separate fixtures. The dedicated white channel in the Derby heads produces cleaner pastel tones and neutral washes that pure RGB fixtures cannot match. A 3-pin XLR DMX link with 3, 6, or 15 channel modes slots into larger lighting systems without rewiring.

Technical parameters — what the spec sheet means on stage

The numbers below come straight from the manufacturer datasheet and translate into real-world stage behavior for a working DJ or band.

• LED Configuration: 2x PAR 3x3W RGB + 2x Derby 4x3W RGBW — four heads total, mixing wash and animated beam duties on one bar
• Color System: RGBW — dedicated white diode for cleaner pastel tones and neutral washes beyond standard RGB mixing
• Power Consumption: 60 W — runs from a standard mains socket without tripping venue circuits
• DMX Channels: 3 / 6 / 15 — three channel modes cover simple plug-and-play setups and full console programming
• Dimensions & Weight: 750 x 150 x 80 mm, 5.7 kg — bar-mount footprint fits standard lighting stands and packs into the included soft bag
• Operating Modes: auto, sound, master/slave, DMX, IR remote — five control paths from hands-off automatic shows to full console control

Who the LED Derby Par is built for

This rig is the right choice for mobile DJs, wedding bands, and event crews who need a complete lighting setup that goes from bag to stage in under five minutes. School events, pub gigs, and small club nights benefit from the sound-active mode, which pulses the fixtures in time with the music through a built-in microphone. Solo performers get a self-contained wash-and-beam package without buying separate PAR cans, Derby effects, stands, and cables. Larger productions can daisy-chain multiple units via 3-pin DMX for synchronized shows.