Вибери країну доставки

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-кабель

Код товару: 1338163

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-кабель

Код товару: 1338163

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under…

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-кабель

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under footswitches and pedals.

  • 150 cm length with flat rectangular profile that prevents cable jams and breakage on the pedalboard
  • Straight DIN 5-pin MIDI male to angled 3.5 mm TRS stereo male connector configuration
  • TRS-MIDI Type B pin assignment: MIDI 4 (Source) on tip, MIDI 5 (Sink) on ring, MIDI 2 (Shield) on sleeve
  • Compatible with Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar TRS-MIDI Type B devices
Ще не створено іншого опису твоєю мовою. Можливо, тобі зараз допоможе опис англійською мовою.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built for pedalboard use, it keeps the MIDI signal path tidy and out of the way of footswitches and patch cables.

Flat Rectangular Conductor and Space-Saving Connectors

Built around a flat, rectangular conductor profile that significantly reduces twisting and mechanical stress, this cable stands out from generic round MIDI cables. The Type B pinout routes MIDI 4 (Source) to the TRS tip, MIDI 5 (Sink) to the TRS ring, and MIDI 2 (Shield) to the TRS sleeve.

Connector Configuration — Straight DIN to Angled TRS

A straight-to-angled geometry lets the MIDI plug sit flush against a controller while the TRS end drops flat against the pedalboard.

  • Connector A: 5-pin DIN MIDI male, straight — standard MIDI hardware input/output
  • Connector B: 3.5 mm TRS stereo male, flat angled — saves vertical space on the pedalboard
  • Connector Angle: Straight to Angled — keeps the cable flush against the board surface

TRS-MIDI Type B Pin Assignment

Type B wiring is the critical functional spec for this cable. Using the wrong type means no MIDI communication. Pins 1 and 3 are intentionally left unconnected.

  • Classification: TRS-MIDI Type B — matches Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox devices

Cable Construction — Flat Profile

Reducing strain on solder joints and preventing the cable from springing back into a coil, the flat rectangular conductor is the key engineering choice here.

  • Length: 150 cm / 59 1/16" — enough reach for medium to large pedalboards
  • Cable Profile: Flat rectangular conductor — prevents twisting, breakage and cable jams
  • Color: Black — blends with standard pedalboard aesthetics

Мета використання

Сумісний з

Універсальний

Особливості

колір

Чорний

Входи та виходи

Вхід для мікрофона

Ні

Роз'єми

Роз'єм типу А

MIDI Male

Роз'єм типу B

Jack STEREO 3,5 mm Male

Перегин роз'єму

Прямий – Кривий

Упаковка

Вміст пакета

Кабель MIDI

Розміри та вага

Довжина

150 cm

Країна

Країна походження

Китай

Документи

Інформація про виробника
Виробник:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Німеччина
Відповідальна особа:
Warwick GmbH & Co Music Equipment KG
Інструкції з техніки безпеки

Будь ласка, звернися до посібника користувача, щоб отримати конкретні інструкції з техніки безпеки для цього виробу