Edifier MR5 White Активний студійний монітор 2 шт.

Tri-Amped Studio Monitor With Reference-Grade Accuracy

A tri-amped studio monitor built for accurate sound reproduction across 46 Hz to 40 kHz, this model pairs three dedicated drivers with three Class-D amplifiers. Three drivers — a 5" woofer, 3.75" mid, and 1" silk dome tweeter — each receive their own Class-D amplifier, eliminating overlap common to 2-way designs. With 110W RMS total output and 101 dB peak SPL at 1 meter, the MR5 fills medium-sized rooms. Honest playback for producers and video editors follows.

What Sets This Monitor Apart in Its Category

Most monitors at this tier use a 2-way design, but the MR5 adds a dedicated mid-range driver with its own amplifier, creating a true 3-way active crossover at 155 Hz and 2600 Hz. The dimpled tweeter waveguide widens the sweet spot. Full DSP and dynamic range control keep the response flat at high SPL, while the 24-bit/96 kHz signal path preserves Hi-Res Audio resolution.

Three-Way Driver Architecture — Why Independent Amplification Matters

Splitting the signal across three drivers with dedicated amps means each transducer handles only its native range. Cleaner transients and a defined stereo image follow at any volume.

• Total Output Power: 110 W RMS — split as 10 W + 10 W treble, 15 W + 15 W mid, 30 W + 30 W bass
• Drivers: 5" woofer, 3.75" mid, 1" silk dome tweeter — each with its own Class-D amp
• Crossover at 155 Hz and 2600 Hz keeps each driver focused
• Max SPL: 101 dB at 1 meter — headroom for medium-sized rooms

Inputs and Wireless Streaming — Studio and Desktop in One Box

The MR5 accepts signals from audio interfaces, mixers, and turntables at once, with input mixing that lets two sources play simultaneously. Bluetooth 6.0 with multipoint pairs two devices, while LDAC streams up to 990 kbps at 24-bit/96 kHz.

• Wired Inputs: Balanced XLR, balanced 6.3 mm TRS, RCA, 3.5 mm AUX — covers pro and consumer gear
• Wireless: Bluetooth 6.0 with LDAC and SBC codecs — high-resolution streaming from phones
• A 3.5 mm headphone output on the front enables silent monitoring
• Signal-to-Noise Ratio: ≥ 85 dB (A-weighted) — quiet background at idle

Room Compensation and EQ — Tuning the Sound to Any Space

Every room colors the sound differently, so the rear panel and EDIFIER ConneX app provide compensation. High and Low knobs apply ±6 dB shelves above 10 kHz and around 125 Hz, while the app adds Low Cut-Off, Acoustic Space, and Desktop Control.

• High Shelf: ±6 dB above 10 kHz — tame or brighten the top end
• Low Shelf: ±6 dB around 125 Hz — manage room modes and bass buildup
• Three listening modes — Music, Custom EQ, Monitor — switch via the front knob or app
• Dimensions: 159 × 264 × 280 mm — bookshelf-friendly footprint

Who Should Choose This Monitor

The Edifier MR5 is the right choice for home-studio producers, podcasters, and content creators who need honest monitoring without professional pricing. Video editors benefit from the wide 46 Hz to 40 kHz response when grading dialogue, while gamers and desktop listeners get the same accuracy for everyday playback. The white finish suits modern studios.